ExtremeSwitching, Summit, and E4G Components: ExtremeXOS and Switch Engine Software Support

The following tables provide information about the minimum version of ExtremeXOS (EXOS) and Switch Engine software required to support Extreme Networks switches and routers.

Each hardware platform is supported for all software versions from the minimum version listed through the last supported version. When EXOS 16.x (or 22.x) is listed as the last supported version, the hardware platform is supported in all 16.x (or 22.x) versions, including the latest patch versions.

Exception: Hardware platforms that have reached End of Version Maintenance (EoVM) are not supported in patches released after their EoVM dates. A platform reaches EoVM 36 months after its End of Sale (EoS) date. For information specific to your hardware platform, see End of Sale and End of Service Life.

Note: The switch’s BootROM is not automatically upgraded when software is upgraded. Make sure you are running the minimum required BootROM version. Use the download bootrom command to download a BootROM image.

Select a hardware platform

Universal hardware platforms
5320  5420   5520   5720

Platforms supported in EXOS 30.x, 31.x, and 32.x
X435   X440-G2   X450-G2   X460-G2   X465   X590   X620   X670-G2
X690   X695   X870   V300   V400

Older platforms
X430   X440   X450   X460   X480   X670   X770   E4G

5320 Switches: Software Support

The 5320 switch is also supported on Fabric Engine version 8.6 and later.

Table last updated 7 September 2022

5420 Switches: Software Support

Note: If your 5420F-48P-4XE or 5420M-48W-4YE switch’s manufacturing revision code is AC, you must install ExtremeXOS version 31.3.1.3-patch1-10 (or later). This limitation does not apply to other models of the 5420, and it does not apply to any manufacturing revision codes other than AC.

To find out if your 5420 switch is affected, issue the command show version. The two-digit manufacturing revision code appears in the first line of output (underlined in the following example):

5420-switch1 # show version
Switch : 801086-01-AC JA042138G-00071 Rev AC BootROM: 2.3.2.3 IMG: 31.3.1.3

The 5420 switch is also supported on VOSS versions 8.4 and 8.5, and on Fabric Engine 8.6 and later.

Table last updated 7 September 2022

5520 Switches: Software Support

The 5520 switch is also supported on VOSS versions 8.2.5 through 8.5, and on Fabric Engine version 8.6 and later.

Table last updated 7 September 2022

5720 Switches: Software Support

The 5720 switch is also supported on Fabric Engine version 8.7 and later.

Table last updated 7 September 2022

X430 Switches: Software Support

Table last updated 23 October 2017

X435 Switches: Software Support

Table last updated 26 February 2020

X440 Switches: Software Support

Table last updated 29 July 2016

X440-G2 Switches: Software Support

Note: If your X440-G2 switch’s manufacturing revision code is 10 or greater (for 48-port 10GE4 models) or 08 or greater (for all other models), you must install ExtremeXOS version 21.1.1.4-patch1-5 (or later). This software version includes a flash storage driver that is compatible with the hardware revision.

To find out if your X440-G2 switch is affected, issue the command show version. The two-digit manufacturing revision code appears in the first line of output (underlined in the following example):

X440G2-switch1 # show version
Switch : 800615-00-08 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

All EXOS 16.2 images and all EXOS 22.x (or later) images already have the necessary driver support.

Table last updated 19 September 2016

X450 Switches: Software Support

Table last updated 8 August 2016

X450-G2 Switches: Software Support

Note: Newer X450-G2 models have an updated PoE controller that requires EXOS version 30.4.1 (or later). This applies to the following models:

• X450-G2-24p-GE4-Base, X450-G2-24p-10GE4-Base, X450-G2-48p-GE4-Base, and X450-G2-48p-10GE4-Base with manufacturing revision code of 23 or greater
• X450-G2-48p-10GE4-FB-1100-TAA, X450-G2-24p-GE4-FB-715-TAA, and X450-G2-24p-10GE4-FB-715-TAA with manufacturing revision code of 20 or greater

Note: Many X450-G2 models have an updated flash storage driver that requires either EXOS version 16.1.3.6-patch1-8 (or later) or version 21.1.1.4-patch1-5 (or later). This applies to all X450-G2 models with manufacturing revision code of 15 or greater.

To find out if your X450-G2 switch is affected, issue the command show version. The two-digit manufacturing revision code appears in the first line of output (underlined in the following example):

X450G2-switch1 # show version
Switch : 800601-00-15 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

Table last updated 30 March 2018

X460 Switches: Software Support

Table last updated 8 August 2016

X460-G2 Switches: Software Support

Note: Newer X460-G2 models have an updated PoE controller that requires EXOS version 30.4.1 (or later). This applies to the following models:

• X460-G2-16mp-32p-10GE4-FB-TAA and X460-G2-16mp-32p-10GE4 with manufacturing revision code of 14 or greater
• X460-G2-24p-24hp-10GE4-FB-TAA and X460-G2-24p-24hp-10GE4-Base with manufacturing revision code of 17 or greater
• X460-G2-48p-GE4-FB-1100-TAA, X460-G2-48p-10GE4-FB-1100-TAA, X460-G2-24p-GE4-FB-715-TAA, and X460-G2-24p-10GE4-FB-715-TAA with manufacturing revision code of 22 or greater
• X460-G2-48p-GE4-Base, X460-G2-48p-10GE4-Base, X460-G2-24p-GE4-Base, and X460-G2-24p-10GE4-Base with manufacturing revision code of 26 or greater

Note: Many X460-G2 models have an updated flash storage driver that requires either EXOS version 16.1.3.6-patch1-8 (or later) or version 21.1.1.4-patch1-5 (or later). This applies to the following models:

• X460-G2-48x-10GE4 with manufacturing revision code of 12 or greater
• X460-G2-24t-GE4, X460-G2-24t-10GE4, X460-G2-48t-GE4, X460-G2-48t-10GE4, and X460-G2-24x-10GE4 with manufacturing revision code of 14 or greater
• X460-G2-24p-GE4, X460-G2-24p-10GE4, X460-G2-48p-GE4, and X460-G2-48p-10GE4 with manufacturing revision code of 15 or greater

To find out if your X460-G2 switch is affected, issue the command show version. The code appears in the first line of output (underlined in the following example):

X460G2-switch1 # show version
Switch : 800552-00-15 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

Table last updated 30 March 2018

Note: The grounding lug (16714) can be inserted into the unused TM-CLK slot.

X465 Switches: Software Support

Table last updated 25 February 2020

X480 Switches: Software Support

Table last updated 8 August 2016

X590 Switches: Software Support

Table last updated 6 September 2018

Note: The X590 switch is not compatible with ExtremeXOS version 30.1, but it is supported on ExtremeXOS version 30.2 and later.

X620 Switches: Software Support

Note: Some X620 switches require ExtremeXOS version 21.1.1.4-patch1-5 (or later), which includes a flash storage driver that is compatible with the hardware revision.

To find out if your X620 switch is affected, check its two-digit manufacturing revision code and compare it with the codes listed in the table below. To find the code, issue the command show version. The code appears in the first line of output (underlined in the following example):

X620-switch1 # show version
Switch : 800630-00-11 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

All EXOS 22.x (or later) images already have the necessary driver support.

Table last updated 7 September 2022

X670 Switches: Software Support

Table last updated 8 August 2016

X670-G2 Switches: Software Support

Note: In addition to the minimum EXOS versions listed, this switch model is also supported on EXOS version 21.1.1 and later.

Note: If your X670-G2 switch’s manufacturing revision code is 14 or greater, you must install either ExtremeXOS version 16.1.3.6-patch1-8 (or later) or version 21.1.1.4-patch1-5 (or later). These software versions include a flash storage driver that is compatible with the hardware revision.

To find out if your X670-G2 switch is affected, check its two-digit manufacturing revision code. To find the code, issue the command show version. The code appears in the first line of output (underlined in the following example):

X670G2-switch1 # show version
Switch : 800546-00-14 1516G-01191 Rev 1.0 BootROM: 1.0.1.8 IMG: 21.1.2.6

All EXOS 16.2 images and all EXOS 22.x (or later) images already have the necessary driver support.

Table last updated 7 September 2022

X690 Switches: Software Support

Table last updated 7 September 2022

X695 Switches: Software Support

Table last updated 2 April 2020

X770 Switches: Software Support

Table last updated 10 December 2019

X870 Switches: Software Support

Table last updated 7 September 2022

V300 Port Extenders: Software Support

Table last updated 2 April 2020

V400 Port Extenders: Software Support

Table last updated 25 July 2018

E4G-Series Routers: Software Support

Table last updated 8 August 2016

We value your feedback about Extreme Networks documentation. Use our online feedback form to post a comment or suggestion about this information.